Car Drawings

From Bowincars

Jump to: navigation, search
This is historical Bowin Car Drawing Section. See Parts List Code System for drawing category overview. The entire collection of historical car drawings have been kindly made available to the public by the Joyce Family. They were drawn in the days before  
Computer-Aided_Design
  CAD systems were invented such as  
Autocad
 , when all drawings were still being done by hand. This unique collection of racing car drawings represents a unique time in Australian motor racing history between 1960's to 1970's.


IMPORTANT NOTE ON LICENSING: These drawings remain the property of Bowin mfg Pty Ltd. Bowin Car owners and car enthusiasts are permitted to view and print drawings for use with Bowin Cars and restoration work on pre-existing historical vehicles. These drawings should not be published or transmitted by any third-party without first seeking permission from Bowin mfg Pty Ltd.

If anyone wishes to make replicas of the original car parts, for use in models or racing cars, for commerical use. Permission must be sought from Bowin mfg Pty Ltd in relation to commercial licensing.

FILE FORMAT: The file type is Portable Document Format  
PDF
 s.
Bowin Car Designer John Joyce at the drawing board
Enlarge
Bowin Car Designer John Joyce at the drawing board



Contents

Bowin P3/P3A

Bowin P3 driven by Glynn Scott
Enlarge
Bowin P3 driven by Glynn Scott

In 1968, the Bowin P3 Formula II was a bold new project to give Australia a fully professional monocoque racing car. The P3 was designed for ANF-1 and 1.5 litre categories, but mainly raced in the Formula Two class. The car was designed by John Joyce founder of Bowin Cars and assisted by Ray Parson's.

Total of 107 Drawings in this Section

Type Code Reg No.
Descripton
Sheet Size
(mm)
Download
(PDF)
P3
172
Caliper Mounting
519 x 388
P3
184
Chassis Tag
391 x 262
P3
122
Steering Column Bush
389 x 263
P3
123
Mounting Bracket Rear Lower Wishbone-GearBox
519 x 769
P3
146
Assembly Of Chassis Unit
522 x 770
P3
147
Main Side Channels - Chassis
774 x 519
P3
148-1
Side Skin Fuel Tank (sheet 1 of 2)
774 x 518
P3
148-2
Typical Section Fuel By Cavity (sheet 2 of 2)
535 x 391
P3
150
Rear Bulkhead - Fuel Tank
771 x 521
P3
151
Sheer Plate - Front Box
772 x 512
P3
152
Front Frame
770 x 520
P3
153
Seat Back Bulkhead
770 x 514
P3
154
Rear Bulkhead Top Section
769 x 518
P3
155
Rear Bulkhead - Lower Half
769 x 517
P3
156
Crossbeam Rear Suspension
771 x 522
P3
157
Mounting Bracket Crossbeam
770 x 516
P3
158
Under Tray
770 x 516
P3
159
Side Panel Cockpit
769 x 528
P3
160
Frame Dash Panel
770 x 520
P3
161
Instrument Panel
783 x 521
P3
162
Crossbeam Pedal Box Mounting
769 x 517
P3
163
Mounting Bracket Rear Lower Radius Arm
771 x 521
P3
164
Mounting Bracket Upper Front Wishbone (Rear)
534 x 391
P3
165
Front Lower Wishbone Mounting (Rear)
772 x 526
P3
166
Typical Section Through Chassis Reference Drawing
771 x 517
P3
167
Engine Mounting Support Chassis
517 x 390
P3
170
1. Mounting Lower Brake M.C & 2. Mounting Lower Clutch M.C
391 x 262
P3
178
Battery Support Front
527 x 389
P3
184
Chassis Tag
391 x 262
P3
187 & 188
No.1 Chassis Body Stud No.2 Body Chassis Bush
392 x 264
P3
190
Battery Cover Mountings 2 Off
771 x 535
P3
191
Rear Locator Battery Cover
771 x 535
P3
194
Seat Belt Mountings Side Mtg 2 Off
771 x 535
P3
195
Seat Belt Mountings Top Rear 2 Off
771 x 535
P3
197
Clutch Foot Rest
772 x 511
P3
104
Vertical Link Right Hand
523 x 391
P3
105
Vertical Link Left Hand
523 x 391
P3
109
Front Lower Wishbone Left Hand
772 x 525
P3
110
Front Lower Wishbone Right Hand
772 x 525
P3
111
Bushes Front Lower Wishbone
390 x 262
P3
112
Front Wishbone Upper
769 x 520
P3
113
Bushes Front Upper Wishbone
390 x 262
P3
114
Spring Damper Unit Front
849 x 294
P3
115
Bearing Damper Unit
390 x 263
P3
171
Front Hub
520 x 392
P3
181
Wheel Studs Front
397 x 260
P3
182
Wheel Studs Rear
397 x 260
P3
204
Road Springs Front
390 x 261
P3
210
Road Springs Rear
390 x 261
P3
205
Spring Abutment Front Top
391 x 264
P3
206
Bolt Lower Front Damper
389 x 269
P3
209
Washer C/Flange O.B.DS
389 x 269
P3
208
Drop Links Anti Roll Bar Front
391 x 264
P3
212
Drop Links Anti Roll Bar Rear
391 x 264
P3
103
Bearing Housing Rear Suspension
771 x 486
P3
107
Outboard Drive Shaft
520 x 378
P3
108
Companion Flange O'BD Drive Shaft
376 x 262
P3
116
Spring Damper Unit Rear
517 x 390
P3
117
Radius Arms Top
518 x 390
P3
118
Radius Arms Bottom
518 x 390
P3
119
Top Link
390 x 262
P3
121
Adjusting Clamp Rear Anti Roll Bar
391 x 262
P3
124
Lower Rear Wishbone Right Hand
769 x 577
P3
125
Lower Rear Wishbone Left Hand
769 x 577
P3
126
SPYDER Drive Shaft
390 x 263
P3
127
Bushes Rear Wishbone
390 x 267
P3
128
Clevis Bolt Lower
390 x 265
P3
129
G.A Rear Suspension
1023 x 770
P3
183
Adjusting Clamp For Anti Roll Bar
390 x 261
P3
211/1
Rear Anti Roll Bar Sheet 1 of 2
771 x 537
P3
211/2
Rear Anti Roll Bar & Bracket Sheet 2 of 2
768 x 512
P3
611
Rear Suspension Mod P3 Ian Fergusson Car
535 x 774
P3
213
Engine Mount (Ford) Right Hand
393 x 270
P3
214
Engine Mount (Ford) Left hand
393 x 270
P3
217
Gear Knob
390 x 264
P3
224
Gear Change Parts
768 x 529
P3
102
Wheel 13.00 x 8.00 Front, 13.00 x 8.00 Rear, 13.00 x 12.00 Rear
1025 x 783
P3
173
Wheel & Hub Drilling Jig
390 x 262
P3
132
Track Rod Adaptor
340 x 262
P3
133
Rack & Pinion Assembly
1023 x 769
P3
134
Steering Rack
769 x 517
P3
136
Housing Steering Rack
770 x 517
P3
137
Steering Arm Pin
391 x 263
P3
174
Steering Column Upper
390 x 263
P3
175
Wheel Base Steering Column
390 x 263
P3
176
Steering Column Lower Section
392 x 263
P3
180
Rack Mounting Clamp
390 x 265
P3
138
Brake Pedal
517 x 390
P3
139
Balance Bar
390 x 262
P3
140
Clevis Pivot Locknut - Balance Bar
391 x 262
P3
141
Brake Disc Rear
516 x 389
P3
143
Pedal Pads
390 x 262
P3
168
Mounting Brackets Brake Master CYLS
519 x 391
P3
218
Master Cylinder Push Rods
389 x 264
P3
179
Oil Tank
1031 x 771
P3
219
Water Radiator
1023 x 775
P3
220
Swirl Pot
516 x 391
P3
221
Oil Pipes Chassis
390 x 263
P3
101
Fuel Tank Bowin P3
771 x 523
P3
177
Fuel Filler Neck
390 x 263
P3
185
Tank Cap
392 x 266
P3
186
Tank Adaptor
392 x 266
P3
142
Clutch Pedal
516 x 390
P3
144
Clevis Clutch Master Cylinder Push Rod
390 x 262
P3
169
Mounting Bracket Clutch Master Cylinder
518 x 390
P3
120
Mounting Bracket Fuel Injection Con' Box
517 x 391
P3
229
Throttle Pedal
518 x 397

Bowin P4

Bowin P4
Enlarge
Bowin P4
Bowin P4 Formula Ford Project. Formula Ford

Total of 27 Drawings in this Section.


Type Code Reg No.
Descripton
Sheet Size
(mm)
Download
PDF
P4A
246
Chassis Details
1075 x 772
P4A
247
Mounting Frame Radiator & Oil Tank
772 x 510
P4A
249
Chassis Y Frame
518 x 399
P4A
254
Battery Carrier
770 x 510
P4A
250
Seat Detail
771 x 510
P4A
241
Front Suspension Top Through Bolt
374 x 258
P4A
256 & 257
Road Springs Front & Rear
390 x 259
P4A
259
Spring Damper Unit Front
517 x 387
P4A
260
Top Wishbone Front
766 x 516
P4A
242
Anti Roll Bar Drop Link
375 x 259
P4A
244
Rear Disc Centre Machining Detail
374 x 259
P4A
245
Rear Hub Bearing Space
375 x 259
P4A
251
Outboard Drive Shaft
389 x 269
P4A
252
Machine Detail Rear Companion Flange
390 x 270
P4A
253
Intermediate Drive Shaft
518 x 389
P4A
258
Spring Damper Unit
517 x 388
P4A
261
Bottom Wishbone Front
768 x 528
P4A
243
Gear Change Chassis Bushes
392 x 264
P4A
248
Fuel Tank
770 x 514
P4A
234 & 235
Lower Rear Wishbone RH & LH
770 x 518
P4
236
Hub Adaptor Front
519 x 393
P4
237
Hub Adaptor Rear
514 x 389
P4
238
Gear Change Assembly
774 x 521
P4
239
Brake Pedal
518 x 394
P4
240
Clutch Pedal
518 x 401
P4A
255
F.F Wheel Detail
518 x 389
P4
FF
Chassis Scheme
1076 x 769

Bowin P5

I believe this project relates to Frank Matich's A50 tub. Construction was entrusted largely to Bowin. The A50 went onto to win the 1971 Australian Grand Prix.[1]


Type Code Reg No.
Descripton
Sheet Size
(mm)
Download
PDF
P5
519
Elementary Layout
497 x 769

Bowin P6/P6F

Leffler driving the Bowin Formula Ford P6
Enlarge
Leffler driving the Bowin Formula Ford P6

1972 Bowin P6 Formula Ford Project.

Total of 107 Drawings in this Section.


Type Code Reg No.
Descripton
Sheet Size
(mm)
Download
PDF
P6
625
(LH & RH) Brake Calliper Adaptor Sleeve
269 x 395
P6
605
Rack Mount Adaptations (Canadian F.F)
394 x 271
P6
598
One Way Valve Mod. Fuel System F2
395 x 268
P6
597
U'Joint Flange Mod F2
267 x 395
P6
596
Needle Bearing Retainers Front and Rear
395 x 266
P6
593
Exhaust Stay F2
397 x 266
P6
591
Clevises - Wing Frame
396 x 265
P6
589
Muffler
394 x 265
P6
584
Rear Wheel Stud F2
268 x 395
P6
582
Calliper Adaptor Rear Casing F2 (sheet 1 of 3)
394 x 272
P6
582
Calliper Adaptor - Rear - F2 "AR" Calliper (sheet 2 of 3)
272 x 386
P6
582
Calliper Adaptor Rear - F2 - D12R Calliper (sheet 3 of 3)
267 x 393
P6
578
Spacer Hub Bearing F2
394 x 271
P6
573
Mod To Front Hub - F2
395 x 273
P6
572-1-2
Hub Carrier Pin Collars Front - F2
393 x 276
P6
562
Mods to Front Hub F.F Canada
390 x 285
P6
561
Spacer Front Disc's F.F Canada
288 x 386
P6
560
Mod to Old 8304 Disc - F.F Canada
390 x 292
P6
569
Rear Disc Mod Suit CP2398 Calliper (Canada)
396 x 288
P6
568
Adaptor - Inboard Brakes Suit CP2398 Calliper (Canada)
395 x 291
P6
566-1
Upper & Lower Pins Vert Link FF Canada
390 x 286
P6
566-2
Calliper Bracket F.F Canada
395 x 291
P6
565
The Rod Lever F.F Canada
395 x 288
P6
455
Clevis Bolt Spacer
392 x 264
P6
452
Anti Roll Bar Special Anchor Bolt
390 x 290
P6
451
Wiring Diagram Schedule
290 x 391
P6
450
Throttle Stop & Cable Back Stop
292 x 390
P6
449
Exhaust Stay
391 x 279
P6
448
Damper Spacers & Wishbone Packer Details
295 x 390
P6
447
Brake Pipe & Fittings Schedule
390 x 278
P6
446
Body Fixings On Side Cowels
278 x 392
P6
444
Rear Anti Roll Bar Support Clamp
278 x 390
P6
417
Inboard Brake Systems G/Box Spacers
391 x 278
P6
415
Battery Mtg Channel
278 x 390
P6
413
Engine Mtg Spacer
277 x 390
P6
405
Brake Hose Mtg
272 x 391
P6
375
Top Control Link - Spring Rear - F2, F.F
397 x 264
P6
374
Top Control Link - Spring Rear - F.F
392 x 267
P6
372
( F ) Control Drop Link Spring
391 x 266
P6
373
( R ) Control Drop Link Spring
391 x 266
P6
371
Top Pin & Spacer Vertical Link
394 x 263
P6
284
Anti Roll Bar Clamp (Last Type)
399 x 264
P6
276
Brake Calliper Adaptor Rear ( LH & RH)
399 x 263
P6
274
Slip Yoke - O.B.D.S
398 x 260
P6
275
Brake Disc - Rear
399 x 261
P6
273
Diff Centre - Mods For Inboard Brakes F.F
398 x 262
P6
272
1300 Series H/S Drive Shaft - Inboard/Brake
399 x 260
P6
271
Bearing Side-Plate Inboard Brakes F.F
400 x 265
P6
269
Diff Shoulder Spacer
398 x 262
P6
270
Diff Shoulder Spacer
399 x 262
P6
268
Outboard Drive Shaft
398 x 262
P6
267
Outboard Drive Shaft Forging
398 x 264
P6
266
Rear Top Link
398 x 263
P6
265
Rear Lower Control Rod
398 x 263
P6
281
Chassis Cross Beam Rear
789 x 534
P6
282
Chassis Layout
1051 x 775
P6
404
Roll Over Bar & Radius Arm Mtgs.
533 x 392
P6
406
Instrument Panel (PDF not scanned properly)
537 x 485
P6
408
Aluminium Chassis Panels
777 x 543
P6
410
Engine Mtg Plates
539 x 393
P6
414
Details Of Body Panel Fixing Holes
778 x 534
P6
587
Roll Over Bar Stay F2 (Hart)
514 x 396
P6
592
Nose Support Frame F2
520 x 401
P6
590
Frame Rear Wing
783 x 525
P6
283
Front Lower Wishbone
773 x 537
P6
287
Damper Pivot Arm Front
518 x 394
P6
364
Control Drop Link Front Spring
391 x 266
P6
370
Front Top Wishbone
775 x 534
P6
435
Front Anti Roll Bar
772 x 542
P6
441
Front Anti Roll Bar & Mtgs (Production)
532 x 394
P6
563
Beaing Housing F.F Canada
566 x 390
P6
567
Upright Cones F.F Canada
564 x 401
P6
571
Hub Carrier F2 Caliper Mtg Detail
529 x 396
P6
588
Control Links Front Spring 6 3/4"x 7 1/4"
519 x 395
P6
607
Schematic Front Suspension P6 Canadian
783 x529
P6
608
Front Suspension
872 x 785
P6
609
Geometry Drawing Front Suspension P6
1060 x 787
P6
641
Road Springs (P6-P8)
499 x 382
P6
647
Front Upright Scheme F2
535 x 787
P6
263
Inboard Suspension Mgt
1037 x 786
P6
264
Pivot Arm Rear LH Drawn RH Opposite
786 x 520
P6
277
Intermediate Drive Shaft
513 x 397
P6
278
Rear Suspension G. Assy
1052 x 790
P6
279
Inboard SVSP Mgt.
1055 x 789
P6
280
Damper Pivot Arm Front Rear
516 x 401
P6
285 & 286
Rear Radius Arms Top & Bottom
512 x 397
P6
411
Hub Carrier Support Stay
533 x 394
P6
412
Pivot Arm Spacers
392 x 271
P6
442
Rear Anti Roll Bar (Production)
528 x 392
P6
579
Inboard Suspension Mgt F2
785 x 525
P6
262
G.A Of Inboard Brake Diff Assy.
789 x 589
P6
409
Details Of Gear Shift Parts
539 x 392
P6
585
Gear Shift 2nd & 3rd Motion Shafts
521 x 409
P6
577
Brake Discs Front F2
538 x 401
P6
288
Side Radiator
778 x 535
P6
439
Oil Tank
780 x 543
P6
440
Swirl Pot
533 x 395
P6
445
Oil Tank Support
399 x 533
P6
586
Swirl Pot F2 (Hart)
519 x 400
P6
407
Fuel Tank
773 x 543
P6
570
Fuel Cell F.F
784 x 530
P6
580
Fuel Cell Side
786 x 527
P6
581
Hub Carrier Fabricated
786 x 581
P6
583
Fuel Tank Side F2
785 x 538
P6
623
Clutch Slave Cylinder Push Rod
456 x 271
P6
457
CP2398 Caliper Mtg Scheme Mk 9 S/Plate
517 x 391
P6
458
Rollover Bar Support Stay Details
511 x 386

Bowin P7

Peter Geoghegan in the Super Falcon
Enlarge
Peter Geoghegan in the Super Falcon
This project relates to the "Super" Falcon GTHO Touring Car driven by 'Big Pete' Geoghegan in the 1972 Bathurst 500. Bowin modified the front & rear geometry to improve the handling of the car. It worked! Because Geoghegan went on to beat Allan Moffat by less than a second at Bathurst, in what is regarded as the greatest touring car race in Australian's history.[2].


Type Code Reg No.
Descripton
Sheet Size
(mm)
Download
PDF
P7
473
Falcon Suspension Layout - Initial Investigation
397 x 517
P7
484
Existing Falcon Floor & Modifications
786 x 524
P7
477
Falcon Front Geometry Normal Ride -+3"
695 x 493
P7
478
Falcon Front Geometry -1/2 deg Camber Horz. BTM Link STD Length
764 x 476
P7
479
-1/2 deg Camber Horiz. BTM Link 15" Long
763 x 473
P7
481
Revised Falcon Front Geometry
767 x 478
P7
482
Falcon Front Geometry As Fitted
1046 x 809
P7
610
Falcon Front Geometry
1046 x 809
P7
474
Rear Axle Geometry Investigation Falcon GTHO
789 x 527
P7
475
Falcon Rear Geometry
471 x 1026
P7
476
Revised Rear Geometry For Falcon GTHO
758 x 494

Bowin P8

Leffler driving the Bowin P8
Enlarge
Leffler driving the Bowin P8

1972 Bowin P8 Formula II & 5000 Project.

Total of 125 Drawings in this Section. The (Type-Code-Reg No) together makes up the Part No.

Type Code Reg No.
Descripton
Sheet Size
(mm)
Download
PDF
P8
309
Cross Beam Rear
774 x 544
P8
312
Chassis Cross Beam - Front Lower
772 x 535
P8
313
Chassis Cross Beam Front Upper
537 x 772
P8
314
Front Side Bulkhead
537 x 391
P8
315
Chassis Cross Beam Upper Front
528 x 391
P8
317
Chassis Side Skins Sheet 1 of 2
535 x 390
P8
318
Chassis Main Channel
538 x 392
P8
319
Chassis Front Panel
391 x 270
P8
321
Chassis Front Frame
772 x 536
P8
322
Chassis Seat Back Panel
770 x 539
P8
330
Chassis Knee & Battery Panel
772 x 536
P8
331
Chassis Bulkhead Rear Fuel Tank
535 x 391
P8
332
Chassis Rear Bulkhead
536 x 390
P8
333
Chassis Steering Column Mtg
393 x 271
P8
333-1
Chassis Steering Column Mtg Redrawn
391 x 268
P8
335
Chassis Lower Engine Plate Mtg
536 x 392
P8
337
Chassis Engine Radiator Mtg.
536 x 393
P8
338
Chassis Mtg. Pad Frame
530 x 390
P8
339
Chassis Upper Rear Mgt.
532 x 390
P8
340
Chassis Lower Rear Radius Arm Mgt.
539 x 390
P8
341
Chassis Back Mgt.
533 x 392
P8
348
Mgt. Bracket Rollover Bar
392 x 267
P8
350
Rollover Bar 14 3/8
772 x 532
P8
351
Foot Rest
390 x 242
P8
353
Seat Belt Mtg.
390 x 270
P8
356
Chassis Top Closing Panel
390 x 268
P8
361
Radiator Mtgs
390 x 266
P8
376
Instrument Panels
537 x 392
P8
381
Chassis Hatch Covers & Back Rings
539 x 392
P8
382
Lower Engine Plate Mtg Tie Beam
533 x 391
P8
383
Oil Pump Cutout & Cover Plate Chassis Channel
774 x 534
P8
384
Seat Back Harness Mountings
391 x 272
P8
385
Rollover Bar Stay Chassis Mountings
391 x 269
P8
387
Nose Section Support Frame
775 x 533
P8
388
Engine Mounting A-Frame (Repco)
773 x 534
P8
389
Engine A-Frame Bushes
391 x 220
P8
390
Oil Cooler Support Bracket
534 x 393
P8
398
Rollover Bar Stays
538 x 396
P8
403
Extinguisher Mtg. Platform
534 x 392
P8
434
Rollover Bar & Stay 16 3/4"
773 x 543
P8
664
Tub Rear Support Stay (Hart F2)
513 x 385
P8
665
Rear Cross Member Support Bracket
388 x 262
P8
674
Chevy V8 - Scheme
515 x 391
P8
677
Chevy V8 DG300 Main Shaft Scheme
387 x 265
P8
393
Body Fittings
391 x 272
P8
423
Windscreen
526 x 392
P8
425
Rear Wing Support Stays (Repco)
528 x 772
P8
426
Rear Wing Fences
390 x 270
P8
428
Cockpit Retaining Channels Etc.
526 x 392
P8
429
Radiator Cowel Retaining Brackets
391 x 269
P8
299
Hub Carrier Front
1058 x 774
P8
302
Wheel Stud Front
390 x 261
P8
303
Hub Carrier Attachments Front
391 x 268
P8
684
Front Wheel Hub
392 x 269
P8
324
Wishbone Lower Front
770 x 541
P8
346
Wishbone Top / Plate
771 x 527
P8
347
Top Control Link: Spring Front
391 x 266
P8
359
Front Damper Pivot Arm
535 x 391
P8
396
Damper Eye Spacers
392 x 272
P8
399
Modified Koni Damper Eye
390 x 277
P8
419-1
Anti Roll Bar
530 x 392
P8
419-2
Revised Front Anti Roll Bar
534 x 393
P8
420
Front Anti Roll Bar Support Bracket
530 x 393
P8
422
Anti Roll Bars Nylon Bushes
390 x 283
P8
648
Front Upright Scheme F5000
1052 x 780
P8
694
Modified Front Damper Pivot Arm
516 x 391
P8
290
Insert Bushes
400 x 259
P8
291
Outboard Drive Shaft Yoke
403 x 260
P8
296
Suspension Gearbox Mgt Plate
774 x 527
P8
297
Rear Lower Control Link
392 x 261
P8
298
Mounting Support Frame Rear Lower Link
520 x 391
P8
308
Top Link Rear
391 x 269
P8
310-1
Pivot Mounting For Inboard Suspension Lower Link (Redrawn)
532 x 388
P8
310-2
Pivot Mounting For Inboard Suspension Lower Link
533 x 392
P8
349
Support Bracket Rear Hub Carrier
391 x 267
P8
357
Wheel Stud Rear
391 x 272
P8
360
Top Control Link Spring Rear
390 x 265
P8
362
Rear Pivot Arm
527 x 390
P8
363
Control Drop Link Rear Spring
396 x 260
P8
365
Assy Spring Carrier Rear
774 x 533
P8
394
Gearbox Crossbeam Special Bolts
268 x 390
P8
400
Rear Suspension X Beam Support Stay
530 x 394
P8
418
Rear Anti Roll Bar
535 x 393
P8
421
Anti Roll Bar Drop Links
391 x 28
P8
601
Anti Roll Bar, Pivot Arm Clevis
390 x 276
P8
306
Eng Gearbox Adaptor
1045 x 770
P8
323
Eng Gearbox Adaptor Repco
1057 x 780
P8
336
Engine Mgt Plate Repco
772 x 541
P8
377
Details Of Gear Shift Parts
774 x 527
P8
378
Gear Shift Support Brackets & Bushes
536 x 391
P8
379
Essex Universal JT Schedule
390 x 275
P8
395
DG 300 Slave Cylinder Adaptor Plate
390 x 268
P8
401
Bell Housing Special Studs
390 x 272
P8
289
Road Wheel, Front & Rear
1050 x 770
P8
311
Housing Steering Rack
1052 x 774
P8
325
Steering Rack
771 x 529
P8
326
Rack Housing Front Bearing Plate
391 x 267
P8
327
Rack Housing Rear Bearing Plate
391 x 267
P8
328 & 329
Adjusting Bolt & Retaining Plug
391 x 268
P8
344
Track Rod
396 x 270
P8
430
Steering Stop
390 x 273
P8
472
Rack G.A
1064 x 778
P8
294
Caliper Adaptor Rear
391 x 262
P8
295
Rear Inboard Brake Installation
771 x 521
P8
300
Brake Disc Front Cone
519 x 391
P8
301
Brake Cone Clamp Ring
391 x 270
P8
304
Brake Disc Cone Rear
391 x 270
P8
358
Pedal Bushes
390 x 270
P8
670
Rear Disc (F2)
516 x 391
P8
334
Water Radiator
771 x 533
P8
391
Oil Tank Filler Neck Adaptor Plate
390 x 270
P8
392
Oil Spray Tube & Fitting Details
534 x 391
P8
402
Water Pipe Details Repco V8
530 x 392
P8
424
Water Pipes (Repco V8)
391 x 275
P8
320
Fuel Bag Tank Rubber
540 x 391
P8
354
Fuel Filler Mgt. Flange
391 x 264
P8
386
Petrol Balance Tank
532 x 392
P8
666
Fuel Surge Tank
519 x 392
P8
668
Fuel Fittings (F2 Hart)
517 x 396
P8
342 & 343
Modified Clutch Spigot & Bearing Carrier
390 x 277
P8
427
Modified Clutch Spigot & Bearing Carrier
390 x 277
P8
355
Throttle Pedal
529 x 391
P8
433
Throttle Cable Bracket
390 x 277
P8
431
Extinguisher Bottle Head Adaptor
391 x 278
P8
432
Extinguisher Cockpit Spray Pipe
535 x 392

Bowin P9

Brian Foley's Super Lightweight Alfa Romeo GTA
Enlarge
Brian Foley's Super Lightweight Alfa Romeo GTA

1973 Alfa Romeo GTA Project. Although only 2 Litre, this 16 Valve fuel injected Alfa engine produced 223 BHP and at 636Kg made this 105 the fastest of its time.[3].

Total of 15 Drawings in this Section.

Type Code Reg No.
Descripton
Sheet Size
(mm)
Download
PDF
P9
516
Layout Of Wheel & Axle Arch GTA
972 x 776
P9
520
Boot Floor & Inside Stiffening Frame Details
974 x 786
P9
521
Details Of Parts For Rear End Mod
974 x 773
P9
528
Engine & Gearbox Installations
979 x 789
P9
513
STD Front Geometry Alfa GTA
972 x 774
P9
531
Front Top Wishbone Details
532 x 783
P9
532
Front Bottom Wishbone Details
775 x 534
P9
559
Mods To Front Upright Foley Alfa
388 x 287
P9
514
STD. Rear Geometry Alfa GTA
969 x 783
P9
515
Modified Rear Geometry GTA
976 x 781
P9
523
Detail Of Lateral Movement restrictor
783 x 539
P9
527
Dry Sump Detail
782 x 534
P9
522
Rear Brake Assy. Alfa GTA
782 x 534
P9
524
Fuel Tank Detail
541 x 392
P9
525
Filler Neck Seal & Back Ring
545 x 393

References

  1. Tasman-Series.com http://www.tasman-series.com/people/aussies/fmatich/fmatich.asp
  2. Bowden's Own http://www.bowdensown.com.au/cars/gthosupa.html
  3. Brian Foley Automotive, http://www.foleyalfa.com.au/foley_alfa_history.htm
Personal tools